Heat transfer | Heat recovery | Energy efficiency
Industrial Electric Air Heaters
Custom electric heating units for process air and other gaseous media, with stainless steel heating rods, temperature monitoring and outlet temperatures up to 400 °C.

Your process. Your requirements.
Built around the application.
Anytherm electrical heaters convert electrical energy into process heat using heating rods in the air stream. They can form a standalone heating stage or be combined with water heating, steam heating and heat recovery in a complete air handling unit.
Features & options
- Custom design for the specified process air and electrical heating duty.
- Fully welded, insulated stainless steel housing with sanitary design.
- Extractable elements for service access.
- Sheathed NiCr-Ni thermocouples and limiting sensors to monitor temperature and protect the heating rods.
Technical overview
Design data & materials
| Parameter | Design / scope |
|---|---|
| Air mass flow | Up to 150,000 kg/h per unit |
| Air discharge temperature | Up to 400 °C, subject to the agreed operating conditions |
| Housing | AISI 304 or AISI 316 stainless steel |
| Heating elements | Stainless steel heating rods; material selected for the duty |
| Insulation | Mineral wool |
Why Anytherm
Process understanding.
Practical engineering.
Personal support.
We work through the requirements with your team and develop a scope that fits the process, installation and operating needs.
Integrated process heating
Electrical heating can be combined with our air handling and heat recovery equipment.
Temperature monitoring included in the design
Thermocouples and limiting sensors support the specified operating and protection functions.
Custom industrial construction
Housing, elements and access are adapted to the process duty and installation constraints.
Combine electrical heating with preheating
Recovered heat or a hot water stage can preheat incoming air before the electrical heater provides the final temperature increase. The arrangement depends on the available heat sources and required operating flexibility.
Define the electrical and process interfaces
Airflow, required temperature rise, electrical supply and control interfaces need to be coordinated during design. The heater and its monitoring arrangement are selected for the agreed operating scenarios.
A closer look
Project examples & equipment details
Select an image to enlarge it. Configurations shown are examples; the final scope is tailored to the project.
Before your enquiry
Practical questions
Can electric heating supplement another heat source?
Yes. Electrical heaters can be combined with hot water, steam or heat recovery stages to achieve the required air temperature.
Does electrical heating automatically reduce CO₂ emissions?
The result depends on the electricity supply, the heat source being replaced and the operating duty. These should be evaluated for the actual project.
What should I include in my enquiry?
Include the air mass flow, inlet and required outlet temperatures, electrical supply, operating scenarios, installation dimensions and control requirements.
Share what you already know. You do not need a complete specification to start the discussion.
Related equipment & expertise
Let’s talk about your process
Discuss your project
with our engineering team.
Share your requirements or a question. We will help you find the right starting point.
Start with your process, operating conditions and what you want to improve. A complete specification is not needed — our sales and engineering team will help clarify the next step.
Contact our team
[email protected]
+41 78 722 2200
Your air handling & air heating specialist
Gabriel Kägi · Head of Sales Engineering
[email protected]
Send us your request
Tell us about your process requirements, technical specifications or potential energy savings.
Prefer a little guidance? Start a guided enquiry ↗