News

In these challenging times we are pleased to inform you that we remain at your disposal with full working capacity – while respecting and complying with the current safety regulations. Anytherm’s modern IT infrastructure offers the possibility for web and video conferences via MS Skype or Teams (or any other common web conference tool) having the possibility to share screens to efficiently discuss your project requests. Our production capacities are available and we can manufacture your devices within the usual delivery…

read more

For an application within the printing industry, Anytherm realized a heat exchanger unit to recover oil from polluted exhaust air. During the drying of printing inks, water, mineral oil and CO2 is released through evaporation into polluted exhaust air. Our heat exchanger unit cools down the contaminated exhaust air, so that the contained substances condense and can then be recycled. The recovered oil can be refined and finally sold and used again. Resulting in clean air at the end of the process, this can eliminate…

read more

An eventful year is ending and we look back to many exciting projects. We would like to take this opportunity to thank you for your trust and the successful and pleasant cooperation throughout the year. We wish you a Merry Christmas and a successful and happy New Year.

read more

Anytherm recently delivered an Electrical Air Heater with a capacity of 70’000 kg/h as well as a Cooling Dehumidifier Unit with a flow rate 80’000 kg/h to a customer in Finland. With our Electrical Heating solutions, process air can be heated up to 400°C using electricity as energy source. Electrical heating elements can be integrated in all of our customized products – e.g. as extractable part installed in an insulated casing. Further information about our Electrical Heater solutions can be found in the Products section of our website. 

read more

For a customer in Singapore, we recently delivered a Sorption Wheel Unit and a Fines Return Filter Unit. The Sorption Wheel Unit consists of a cooling pre-dehumidifier drying air from 25 to 11 g/kg which is then further dehumidified by means of absorption to 2 g/kg. A Pre Heater Recuperator was recently delivered to a customer in Denmark and is used for energy recovery of process air. For a German customer in the food industry an Exhaust-Air-Recuperator was delivered. The unit processes 140’000 m3/h of exhaust air and provides 740…

read more

More than 2 million kilograms per hour of production and exhaust air which is processed and/or recovered by our heat exchange and heat recovery units delivered within the past two years! We would like to express our gratitude to our customers all over the world for the trust placed in us. Don’t hesitate contacting us if you want to receive our reference list to learn more about our numerous and versatile projects.

read more

Two identical Sorption Dehumidifier Units have been manufactured and timely delivered to Spain where they are currently being installed in a food processing plant. The two units consist of sorption dehumidification wheels, electrical heaters and filter stages and are completely made from stainless steel. The casing is insulated to reduce energy losses into its surroundings. The wheels, electrical heaters and filters are easily accessible via the insulated doors.

read more

A Steam Air Heater Unit as shown in the attached CAD drawing is currently being produced for one of ANYTHERM’s main customers. The Steam Air Heater Unit will be equipped with a wintercoil, a flash steam and a condensate cooling stage, transferring the maximum amount of energy from the steam to the process air. Furthermore, the Steam Air Heater Unit will be executed including armatures and piping on the inlet steam, providing our customer a turnkey system – ready to connect, ready to use.

read more

In cooperation with a new production partner, two fines return filter units have been produced and timely delivered to our customer. The units have been designed and fabricated according to PED (2014/68/EU) incl. CE certification. The project execution went smooth and the products fulfil the high quality requirements of our customer. Cooperating with further certified production partners increases Anytherm’s flexibility and production capacity, assuring high quality project execution also when having sharp deadlines or high workloads.

read more

ANYTHERM received an order of two sorption wheel dehumidification units for a factory in Spain. Both units consist of process and regeneration air fans, filter stages, a rotating PPS (silica gel) sorption wheel and electrical heaters – all installed into gas tight and insulated stainless steel housings. All parts can be easily extracted out of the casing, facilitating their inspection, cleaning and replacement. With our sorption wheel solutions, process air can be dehumidified without the need of ice water (as usually used for dehumidification…

read more